FD30 Fire Rated - ULTRA Flush Door Kit

This kit is suitable for:

• Minimum stud 63mm - No max
• 12.5mm standard plasterboard

Kit Contents:

• Aluminium door frame
• 44mm solid core flush primed door
• Magnetic latch (Cylinder, Handle or Thumb turn)
• Bumper seals
• Concealed hinges
• Hinge cover plates and strike plate
• Intumescent kit.

Please note that handles are not incuded and can be purchased seperatly. See our accessories range.

Ultra Flush Door system:

• No face sanding or priming required Ultra-smooth and opaque surface*
• New polymer face will accept wide range of paint types
• Tested to EN ISO 2409/DIN 53151 – grade 0-1 FD30
• All Primed 2 Go products are FSC® Certified

*These doors are specificily routed/serviced to suit our frame after the finish of the door has been applied, therefore the rebated back section and rebated front will need to be primed- Priming instructions below*

Instructions

Ultra Flush Frame Instructions: here.

Ultra Flush Door Instructions: here.

Delivery

We offer delivery across the UK mainland. For deliveries to locations such as the Scottish Highlands, surrounding UK islands, or other remote areas, additional charges may apply. If you are unsure about delivery options or costs for your location, please contact our office for assistance. We are happy to supply you with a quote.

Delivery Times

• Standard delivery service for Ultra Flush doors is 2-5 working days.
• Next working day delivery for our Ultra Flush - Orders would need to be placed before 10:30am.
• You will receive a 2-hour delivery time slot on the day of delivery.

Returns

• When the goods are delivered you have 48 hours to notify us of any discrepancies, no claims will be accepted after this time.
• Due to the bespoke nature of these doors these are a special item manufactured to order and therefore the doors are non-returnable unless due to manufacturing defects notified to us within 48 hours of delivery.

Care & Handling

• The weight of fire doors and other solid core doors are heavier than would normally be handled by one person. Doors should normally be handled by at least 2 people. Doors should always be stacked on a flat and level surface in a well ventilated room. The stack height should be limited to ensure safe handling is possible. Never store a door on its edge or end.
• Use at least three load bearers to allow equal weight distribution. Ensure that the bearers are wider than the door. Always stack the widest doors at the bottom.
• Do not allow direct sunlight on the doors, as this may cause fading.
• The door must not be stored or fitted in a building with wet trades. For example, plastering should have been finished and given time to completely dry. Doors and frames must be stored in dry conditions and free from excessive moisture levels.
• If stacking doors, store them in the sequence you are using them to prevent unnecessary movement.
• Products manufactured from timber related materials, along with the packaging, are combustible, therefore the product should be stored away from radiant heat or fire. In case of fire, use water to extinguish. When using timber products splinters may occur. Care should always be taken and where appropriate protective gloves should be worn.
• The disposal of waste polythene or other packaging materials should be through the normal trade recycling or refuse collection outlets.
• When handling timber products, normal hygiene standards should be used before food and drink is consumed.